VERTICAL |
| Channels | 2 |
| Bandwidth | DC ~ 60MHz(-3dB) |
| RiseTime | 5.8ns Approx. |
| Sensitivity | 2mV/div ~ 5V/div (1-2-5increments) |
Accuracy
| ∮(3% x |Readout|+0.05 div xVolts/div+0.8mV) |
| InputCoupling | AC, DC & Ground |
Input Impedance
| 1M∮2%, ~16pF |
| Polarity | Normal & Invert |
Maximum Input
| 300V (DC+AC peak), CATII |
| Waveform SignalProcess | + , - , FFT |
Offset Range
| 2mV/div ~ 20mV/div : 0.5V ;50mV/div ~ 200mV/div : 5V ; 500mV/div ~ 2V/div : 50V ; 5V/div :300V |
| BandwidthLimit | 20MHz (-3dB) |
TRIGGER |
| Sources | CH1 , CH2 ,Line |
Modes
| Auto-Level, AUTO,NORMAL, SINGLE, TV, Edge |
| Coupling | AC , DC , LF rej. , HF rej. ,Noise rej. |
| Sensitivity | DC ~ 25MHz : Approx. 0.5div or5mV
25MHz ~ 60MHz : Approx. 1div or 10mV |
HORIZONTAL |
| Range | 1ns/div ~ 10s/div (1-2-5increments); ROLL : 250ms/div ~ 10s/div |
| Modes | MAIN, WINDOW, WINDOW ZOOM, ROLL,SCAN, X-Y |
| Accuracy | ∮0.01% |
| Pre-Trigger | 20 div maximum |
| Post-Trigger | 1000 div |
X-Y MODE |
| X-AxisInput | Channel 1 |
Y-Axis Input
| Channel 2 |
| Phase Shift | ∮3 at 100kHz |
SIGNAL ACQUISITION
|
| Real-Time Sample Rate | 1GSa/s maximum |
Equivalent Sample Rate
| 25GSa/smaximum |
| VerticalResolution | 8 Bits |
| RecordLength | 25K Dotsmaximum |
Acquisition Mode
| Normal, Peak Detect,Average |
Peak Detection
| 10ns |
Average
| 2 , 4 , 8 , 16 , 32 , 64 , 128 ,256 |
CURSORS AND MEASUREMENT |
| VoltageMeasurement | Vpp , Vamp , V avg , Vrms , Vhi ,Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , FallPreshoot/Overshoot |
| TimeMeasurement | Freq , Period , Rise Time , FallTime , Positive Width , NegativeWidth , Duty Cycle |
DelayMeasurement
| Eight different delaymeasurement |
| CursorsMeasurement | Voltage difference betweencursors (V) Time difference between cursors (T) |
Auto Counter
| Resolution : 6 digits
Accuracy : ∮2%
Signal Source: All available trigger source except the Videotrigger mode |
CONTROL PANEL FUNCTION
|
| Autoset | Adjust Vertical VOLT/DIV,Horizontal TIME/DIV, and Trigger level automatically |
| Save Setup | Up to 20 sets of measurementconditions |
Save Waveform
| 24 sets of waveform |
DISPLAY
|
| TFT LCD Type | 5.6 inch |
DisplayResolution
| 234 (Vertically) x 320(Horizontally) Dots |
DisplayGraticule
| 8 x 10 divisions ; 8 x 12divisions (menu off) |
DisplayBrightness
| Adjustable |
INTERFACE
|
| Go/NoGoOutput | 5V Maximum/10mA TTL OpenCollector Output |
| RS-232Interface | DB 9-pin male DTE RS-232interface |
| GPIB Interface(Option) | Fully programmable with IEEE488.2 compliance |
| USB | USB Host/Device 2.0 full speedsupported |
POWER SOURCE
|
Line VoltageRange
| AC 100V ~ 240V , 48Hz ~ 63Hz ,Auto selection |
BatteryPower(Option)
| Battery : 11.1V Li-Ion batterypack
Charge Time : 8 hours (Power ON)
Operating Time : 3 hours , depending on operating condition |
MISCELLANEOUS
|
Multi-Language Menu
| Available |
| Online Help | Available |
| Time Clock | Time and Date, Provide theDate/Time for saved data |
| DIMENSIONS &WEIGHT | 254D x 142H x 310W(mm)
Approx. 4.3kg |
