日本PEACOCK孔雀量表 117Z 高度測量百分表日本PEACOCK孔雀量表 117Z 高度測量百分表日本PEACOCK孔雀量表 117Z 高度測量百分表日本PEACOCK孔雀量表 117Z 高度測量百分表日本PEACOCK孔雀量表 117Z 高度測量百分表

The New Pic Test is a lever type dial indicators used in all over the world.  It is a measuring instrument used for measurements of restricted areas,and the outside/  inside, groove width and centering with the dial gauge installed to the lathe or the milling  cutting machine for measurements with the gauges held on the height gauges.

Without change lever (Automatic inverse type)  The lever type dial gauge of this type has no change lever, the contact point inverses  automatically in normal or reverse direction as desired and pointer turns always CW to  improve the measuring efficiency. Miniature Bearing Used  The miniature bearing used as a bearing at the pivot of the contact point to show good  indication stability without any effect by rod play. O-ring used  Oil resistance is enhanced by seating the O-ring in the turning sectionof the outer frame. Specifications Model Graduation (mm) Range (mm) Reading Accuracy (?m) Measuring force less than (N) Wide-range forward accuracy Adjacent error Backward error PCN-0 0.01 0.5 0 - 25 - 0 5 5 3 0.3 PCN-1A 0.01 0.5 0 - 25 - 0 5 5 3 0.3 PCN-1B 0.01 0.8 0 - 40 - 0 8 5 3 0.3 PCN-1L 0.01 1.0 0 - 50 - 0 10 5 4 0.3 PCN-2 0.002 0.28 0 - 140 - 0 3 2 2 0.3 PCN-2B 0.002 0.2 0 - 100 - 0 3 2 2 0.3 PCN-S 0.001 0.14 0 - 70 - 0 3 2 2 0.3 PCN-7A 0.01 1.5 0 - 25 - 0 8 5 3 0.3 PCN-7C 0.002 0.6 0 - 100 - 0 6 2 3 0.3 PCN-5 0.01 0.5 0 - 25 - 0 5 5 3 0.3 PCN-6 0.002 0.28 0 - 140 - 0 3 2 2 0.3

Dimensions Model L (mm) PCN-1A, PCN-7A 21.3 PCN-1B 22.2 PCN-1L 42.8 PCN-2 17.8 PCN-2B, PCN-7C 16.6 PCN-S 11.7	Dimensions Model L (mm) PCN-0 21.3
Dimensions Model L (mm) PCN-5 21.3 PCN-6 17.8