- 如果您對該產品感興趣的話，可以
- 產品名稱：RAIL-35-1美國OMEGA RAIL-35-1
- 產品型號：RAIL-35-1
- 產品展商：其它品牌
- 產品文檔：無相關文檔
簡單介紹
RAIL-35-1美國OMEGA RAIL-35-1由美國omega原廠渠道的深圳鑫博恒業科技有限公司特價提供,RAIL-35-1美國OMEGA RAIL-35-1精度高,壽命長,RAIL-35-1美國OMEGA RAIL-35-1是值得信賴的精密儀表.
產品描述
RAIL-35-1美國OMEGA RAIL-35-1
RAIL-35-1
過程測量和控制儀器 ? 信號調節器和發射器 ? DRSL-LPO_Series
DIN Rail 2-Wire Transmitter Isolators
DRSL-LPO_Series1 Channel (DRSL-LPO-1) or 2 Channel (DRSL-LPO-2) 2-Wire Transmitter Isolators
Powered By the Host (Output) Current Signal Loop
1:1 Signal Ratio
Low Channel Voltage Drop
Available Input Transmitter (Tx) Supply
Fast Response Time <5 ms
High Conversion Accuracy, <0.05% of Span (3.8 to 20.5 mA)
Slimline 6 mm (0.24") Housing
產品描述
The DRSL-LPO Series DIN rail 2-wire transmitter isolators provide a competitive choice in terms of both price and technology for galvanic isolation of current signals to SCADA systems or PLC equipment. These units provide isolation and 1:1 conversion of standard current signals and are powered by the host (output) current signal loop. Input transmitter (Tx) power supply of 3.5 to 32.5V is provided.
The DRSL-LPO series offers isolation between input and output, provides surge suppression and protects control systems from transients and noise. These units also eliminate ground loops and can be used for measuring floating signals. Low power consumption facilitates DIN rail mounting without the need for any air gap. Measurement ranges are factory calibrated. These isolators operates over a wide temperature range from -25 to 70°C (-13 to 158°F).
SPECIFICATIONS
NUMBER OF CHANNELS
DRSL-LPO-1: 1
DRSL-LPO-2: 2
CURRENT INPUT
Signal Range (Input to Output): 3.8 to 20.5 mA
Signal Conversion: 1:1
Functional Range: 3.5 to 23 mA (NAMUR NE43 compliant)
Available 2-Wire Transmitter (Tx) Supply: 3.5 to 32.5V
CURRENT OUTPUT
Output Loop Current Limitation: 24 mA typical
Output Overload: 50 mA max
GENERAL
Supply Voltage: 6 to 35 Vdc
Internal Consumption: 50 mW per channel
Voltage Drop (Input to Output): 2.5V typical
Isolation Voltage (Test): 2.5 kVac
Isolation Voltage (Working): 300 Vac
Signal/Noise Ratio: >60 dB
Cut-Off Frequency (3 dB): 100 Hz
Response Time (0 to 90%, 100 to 10%): <5 ms
Absolute Accuracy (at 25°C): ≤±8 μA
Temperature Coefficient (>25°C): ≤±0.02 μA [(T-25°C) x Vsupply]
Temperature Coefficient (<25°C): ≤±0.07 μA [(T-25°C) x Vsupply]
EMC Immunity Influence: <±0.5% of span (4 to 20 mA)
Extended EMC Immunity NAMUR NE 21, A Criterion, Burst: <±1% of span
ENVIRONMENTAL
Operating Temperature: -25 to 70°C (-13 to 158°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Calibration Temperature: 20 to 28°C (68 to 82°F)
Relative Humidity: 0 to 95% RH non-condensing
Protection Degree: IP20
Installation Area: Pollution degree 2 and measurement/overvoltage category II
MECHANICAL
Dimensions: 113 H x 6.1 W x 115 mm D (4.4 x 0.24 x 4.5")
Weight: 70 g (0.15 lb) approx
DIN Rail Type: DIN EN 60715 - 35 mm
Wire Size: 0.13 x 2.5 mm2/ AWG 26 to 12 stranded wire
Screw Terminal Torque: 0.5 Nm
產品編號 產品描述
DRSL-LPO-1 DIN rail 2-wire transmitter isolator, 1 channel
DRSL-LPO-2 DIN rail 2-wire transmitter isolator, 2 channel
Accessories
RAIL-35-1 35 mm (1.4") DIN rail, 1 m (3.3') length
DRSL-MOD-STOP Module stop (screwed onto DIN rail to support and hold mounted devices)
RAIL-35-1
RAIL-35-1美國OMEGA RAIL-35-1相關產品
- 溫馨提示：為規避購買風險，建議您在購買前務必確認供應商資質與產品質量。
- 免責申明：以上內容為注冊會員自行發布，若信息的真實性、合法性存在爭議，平臺將會監督協助處理，歡迎舉報
